







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Countertop Installation Cost in Cutler Bay?
Countertop installation in Cutler Bay typically costs $2,000 – $6,500 for most kitchens, with the final number depending on the material and the square footage of the surface. A small galley kitchen with a laminate top can land near the low end, while a full-wrap quartz kitchen with a waterfall island edge, sink cutouts and a matching backsplash pushes toward the top.
That range covers what most clients pay for the top and installation together. The written estimate is what sets the final price, and we give that estimate free after we’ve measured the actual space and seen the cabinet base you’re working from. Our technicians have up to 15 years of experience setting stone, quartz and solid surface, and that experience matters most at the cutouts and seams where a cheap job shows within a year.
If you’re planning the countertop as part of a bigger kitchen project, it rarely lives on its own. Call (833) 630-5172 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical countertop installation in Cutler Bay: $2,000 – $6,500 depending on material and size.
- Cambria, Silestone and Caesarstone quartz sit in our mid to upper range; the estimate depends on footage and edge profile.
- Cutouts for the sink and cooktop, seam count, and whether you keep or replace the cabinet base drive the number.
- A new countertop almost always pairs with backsplash work ($800 – $2,500) and sometimes cabinet replacement ($4,000 – $13,000).
- Free estimates, written per job, so the price you’re quoted is the price you approve.

Countertop Installation Cost Breakdown (2026)
Here’s how a typical Cutler Bay countertop project breaks down. These are estimated ranges for the market, not a fixed quote. Your written estimate is the one that counts.
| Line Item | Typical Estimated Range |
|---|---|
| Countertop installation (standard kitchen, material + labor) | $2,000 – $6,500 |
| Backsplash installation (matching material) | $800 – $2,500 |
| Cabinet installation (if the base needs replacing) | $4,000 – $13,000 |
| Kitchen island installation (with countertop) | $3,000 – $10,000 |
| Small kitchen remodel, countertop included | $9,000 – $20,000 |
| Full kitchen remodel, countertop included | $14,000 – $45,000 |
What pushes a job from the low end to the upper end comes down to a few concrete variables: the surface material itself, linear footage, the number of cutouts and seams, edge profile, and whether the existing base cabinets are level and sound. A quartz top on a sound base with one seam and a single sink cutout sits comfortably in the middle of the range. Add a waterfall island edge, a cooktop cutout, and an undermount sink with a stone apron front, and you’re near the top. Cabinets that are out of level or need shimming add labor time, and that shows in the estimate.
When the countertop is part of a broader remodel, the whole scope matters. If you’re reworking the kitchen from the floor up, our kitchen remodeling service covers cabinetry, surfacing, plumbing fixtures and lighting as one project rather than five separate trades. That single-source approach is the reason we can name specifics like KraftMaid and Wellborn cabinet lines alongside Cambria, Silestone and Caesarstone surfaces and quote them together.
What Affects Countertop Installation Pricing in Cutler Bay
Six things move the price most in this market. If you want to understand where your estimate lands, start here.
- Material choice. Quartz from Cambria, Silestone or Caesarstone sits in the mid to upper range because the slabs cost more than laminate or solid surface and are heavier to handle and cut. A homeowner who wants the look of stone but a tighter budget can size down the footage or pick a simpler slab in the same brand line.
- Square footage and layout. A straight run of counter is the cheapest shape to fabricate. L-shapes and peninsulas add corners, which add seams. Cutler Bay kitchens in the older single-family homes around Saga Bay and Old Cutler often have a compact galley or L layout with a pass-through opening, and that pass-through is where a seam count goes up fast.
- Cutouts and edge profiles. Every sink, cooktop and faucet hole is a cutout, and each one adds fabrication time. An undermount sink cutout costs more than a drop-in because the edge has to be polished and finished. A fancy edge profile (bullnose, bevel, ogee) adds hand work on every linear foot.
- Cabinet condition. Stone surfaces need a flat, solid base. If the existing cabinets are out of level, sagging at the sink, or won’t hold a screw, the base has to be corrected or replaced before the top goes on. That correction is often the surprise line item. If the cabinets are past saving, our Cabinet Installation work runs $4,000 – $13,000 and happens before countertops, not after.
- Removal and disposal. Tearing out an existing countertop, disposing of it, and repairing the wall or backsplash behind it is real labor. A simple laminate removal is quick; a glued-down tile counter with a mortar bed takes longer.
- Backsplash and island scope. A matching backsplash ($800 – $2,500) and an island top ($3,000 – $10,000) are common additions. Keep both in the scope from the start and the fabricator can cut everything from one slab, sometimes with less material waste than ordering separately.
Local building rules matter here too. Most South Florida jurisdictions require a permit when you’re changing plumbing fixtures or moving a sink or cooktop as part of a countertop job, so ask your city’s building department before work begins. We handle the permit question in the written estimate so you know the scope before anything gets cut.

How to Save on Countertop Installation
You don’t save on stone by picking a cheap fabricator. You save by making smart choices about the scope before the slab is ordered. A few practical ways to bring the number down:
- Keep the plumbing where it is. Moving a sink or cooktop means new plumbing and electrical, which is a separate trade and a separate line item. If the existing location works, leave it.
- Cut the seam count. Fewer seams means less fabrication time and less visible joint. A simpler layout with a single straight run can save hundreds compared to a layout that requires multiple joints.
- Choose a simpler edge. A standard eased or straight edge looks clean and costs less than an elaborate profile on every foot.
- Do the backsplash with the counter. Cutting the counter and backsplash from one slab usually means less material waste than ordering them as two separate jobs.
- Fix the cabinet base before you order. If the base is out of level, correcting it as part of the same project avoids a second visit and a re-cut.
- Get a free written estimate. A number on paper tells you where the money is going. Call (833) 630-5172 and we’ll measure the actual space and put the scope in writing.
One more thing worth knowing: when the countertop is one piece of a larger job, doing the whole project with one contractor removes the handoffs. If your project touches the driveway, the roof, the fence or an addition, the same company can carry every phase instead of you coordinating three or four. That’s the idea behind Construction Cutler Bay: from the driveway to the ridge line, one accountable contractor. Browse the full scope on that page before you decide how to phase your work.
Frequently Asked Questions – Countertop Installation Cost
How much does countertop installation cost in Cutler Bay in 2026?
Countertop installation in Cutler Bay typically runs $2,000 – $6,500 in 2026, depending on material and square footage. A small laminate or solid-surface job sits near the low end; a full quartz kitchen with an island and matching backsplash sits near the top. Call (833) 630-5172 for an exact quote. Estimates are free.
Is quartz or granite cheaper to install in Cutler Bay?
Quartz and granite land in roughly the same range here, typically $2,000 – $6,500 for a standard kitchen, because both are engineered or natural stone that need the same fabrication and installation work. The differences show up in slab availability and edge detailing, not in a big gap between the two materials. If you want to compare Cambria, Silestone and Caesarstone options side by side, call (833) 630-5172 for a free estimate.
How long does countertop installation take?
Most countertop installations take one to three days from template to final set, with the biggest variable being fabrication time once the slab is ordered. Removal of the old top, template and fabrication happen first; the install day itself is usually a single visit. Our technicians have up to 15 years of experience and can tell you a realistic timeline in the written estimate. Call (833) 630-5172 to schedule.
Do I need a permit for countertop installation in Cutler Bay?
Most cities require a permit when the countertop job includes moving plumbing fixtures, a sink or a cooktop, so ask your city’s building department before work begins. A straight replacement in the same location usually doesn’t trigger a permit, but the answer depends on your city. Call (833) 630-5172 and we’ll walk through what your project needs.
Can you install a new countertop and replace the cabinets in one project?
Yes. Replacing cabinets and countertops in one project typically costs $4,000 – $13,000 for the cabinet installation plus $2,000 – $6,500 for the countertop, and doing both at once avoids tearing out a new counter to accommodate new cabinets later. That’s the advantage of a single-source contractor who handles cabinetry (KraftMaid, Wellborn) and surfacing (Cambria, Silestone, Caesarstone) together. Call (833) 630-5172 for a free estimate that covers the full scope.
Can you come today?
We can often schedule a measure and free estimate for the same or next available opening, with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, so a call now gets your project into the schedule. Call (833) 630-5172 to book.
Planning the Full Kitchen, Not Just the Top
Most Cutler Bay homeowners who call about countertops are also weighing cabinets, backsplash, plumbing fixtures and lighting. If the kitchen is getting a full rework, the total project range moves into the $14,000 – $45,000 territory for a full kitchen remodel, or $9,000 – $20,000 for a smaller scope, and the countertop is one line inside that budget. Sizing the whole job first is how you avoid paying twice for a template or a cutout because a later phase moved a sink.
If your project extends beyond the kitchen, the same contractor handles the layers around it. Our bathroom remodeling service covers vanity tops and tile work with designer-grade fixtures from Kohler, Grohe, Toto, Moen and Blanco. Our home additions and ADU service includes prefab and modular options from Abodu, Dvele, Mighty Buildings and Boxabl when you need to add livable square footage rather than remodel what’s there. And when the exterior is in the same plan, the roofing service (GAF, CertainTeed, Owens Corning) and driveway and paver work (Belgard, Techo-Bloc, Tremron) are handled by the same company. That breadth is what “we carry the project, not just the trade” means in practice.
What to Have Ready Before Your Countertop Estimate
When we come out to measure, a few details speed the estimate up and make the number more accurate. You’ll want to know the surface material you’re leaning toward, whether the cabinet base stays or gets replaced, whether the sink and cooktop stay where they are, and whether you’re adding a backsplash or an island top. Photos of the existing space help if you’re calling ahead. Bring the kitchen layout, and we’ll bring the measurements and the line-item estimate.
Our technicians have up to 15 years of experience, and the estimate is free and written. You approve the number before any material is ordered. If you’re comparing several materials – quartz, solid surface, or a stone look – we can walk you through the tradeoffs between Cambria, Silestone and Caesarstone and match the slab to the look and the budget you’ve set. Built to spec, not to budget cuts.
Get a Free Countertop Estimate in Cutler Bay
If you’re ready to price a countertop project, the fastest path is a call. Tell us the material and roughly what the kitchen looks like, and we’ll set a measure. From the first walkthrough to the final set, you’ll work with one contractor who handles cabinetry, surfacing, plumbing fixtures and the backsplash as a single scope instead of four separate trades. Construction Cutler Bay offers free estimates on countertop installation and every phase around it. Call (833) 630-5172. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We are closed on Saturday. A call that lands outside dispatch hours is booked into the next opening, Sunday through Friday.
Written by the team at Construction Cutler Bay.
Pricing reflects the Cutler Bay market as of 2026. Construction Cutler Bay offers free estimates – call (833) 630-5172.
What Our Customers Say
"He caught an error in the engineer's drawings before it got framed, which would have been an expensive thing to discover later."
- Kurt Quinn"Every inspection passed first time. The building department clearly knows him and that made the whole process easier."
- Heather Fletcher"Quality construction and a professional operation. Communication was strongest at the site meetings, and slower by email in between."
- Paul Thompson












