







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Cutler Bay Homeowners Choose Kohler Construction
We provide independent Kohler construction service in Cutler Bay, FL. That means our technicians diagnose, repair, and install Kohler bathroom and kitchen fixtures with genuine OEM parts on critical components and quality parts that fit everywhere else, and we give you a straight repair-versus-replace call based on the condition of your fixture, not on a brand policy. We are not affiliated with or authorized by Kohler, and we say so plainly, so what you get is a trained eye on cast-iron enamel, ceramic cartridges, and shower valves that have lived through South Florida water and humidity. Call (833) 630-5172 for a free estimate on any Kohler project in Cutler Bay.
Why Trust Construction Cutler Bay for Your Kohler Construction?

Our technicians have up to 15 years of experience, and that time shows up in how quickly they recognize a Kohler problem for what it is. A dripping Artifacts faucet is usually a worn ceramic disc cartridge, not a mysterious pressure issue. A Devonshire that runs on and off is a fill valve or flapper, not a sign the whole toilet is shot. Knowing the difference keeps you from paying for a replacement you don’t need.
We service Kohler equipment with quality parts that fit it. For the parts that decide whether your fixture holds up – ceramic cartridges, flush valves, thermostatic valve bodies – we source genuine Kohler OEM parts. For supply lines, seals, and other less critical items, a high-quality aftermarket part is fine and keeps the job sensible. That’s a judgment call we explain before we make it.
Warranty-safe service matters too. We work in a way that respects the original Kohler warranty on your fixture, we keep our repair records clear, and if a problem sits inside factory coverage we’ll tell you so you can pursue it. Being an independent Kohler service provider means we can recommend repair or replacement based on condition alone – nobody is steering you toward a sale.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Cutler Bay
Cutler Bay’s subtropical climate – intense sun, salt-laden air off Biscayne Bay, and a long humid season – is hard on plumbing fixtures. Here’s what we see most on Kohler products in local homes.
- Worn ceramic disc cartridges. The ceramic cartridges in Artifacts and other single-handle Kohler faucets wear out over time. You’ll notice a drip at the spout or a lever that feels stiff and gritty. Hard water accelerates the wear, and the fix is usually a fresh OEM cartridge rather than a new faucet.
- Chipped or rusted cast-iron enamel. Cast-iron tubs like the Archer and Kathryn chip or rust at the drain and overflow, especially in homes with hard water. The enamel wears thin at the drain where water sits, and once rust starts it spreads under the finish if it isn’t addressed.
- Fill-valve and flapper leaks. Toilets such as the Devonshire develop fill-valve and flapper leaks that waste water and cause intermittent running. The flapper hardens and stops sealing, and the fill valve sticks open. These are quiet problems that show up on your water bill before you hear them.
- Sticking thermostatic and pressure-balance valves. Kohler shower valves can stick or lose temperature control due to mineral buildup. In a home with hard water, scale collects in the valve and the handle gets stiff or the temperature drifts. Cleaning and servicing the valve often restores control.
- Finish and surface wear. Salt air and constant humidity dull finishes and pit surfaces faster here than in drier climates. When the finish is failing on a faucet or fixture, we’ll tell you whether a repair still makes sense or whether replacement is the better spend.
Kohler Parts & Our Repair-vs-Replace Approach

Parts choice is where a Kohler repair either lasts or comes back. We use genuine Kohler OEM parts for critical components – cartridges, flush valves, and thermostatic valves – because those parts decide how the fixture performs day to day. High-quality aftermarket parts are fine for less critical items like supply lines and seals, and using them keeps a small job from becoming an expensive one. We don’t claim to stock OEM parts that we don’t, and we don’t sell you a part you don’t need.
On repair versus replace, we use a simple rule. If a Kohler fixture is more than 15 to 20 years old and the repair cost approaches half the price of a new fixture, we’ll lay out the trade-offs and let you decide. Sometimes a $300 repair on a fixture that will last several more years is the right call. Sometimes it isn’t. You get the reasoning either way.
Call (833) 630-5172 to talk through your Kohler repair and get a free estimate.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We look at the actual fixture and the symptom together – the cartridge, the fill valve, the shower valve, the tub surface – and confirm what’s failing rather than guessing from the complaint. For a Kohler faucet, that means checking cartridge wear and body condition; for a Devonshire, it means testing the fill valve and flapper separately.
- 2
Repair or install. Once the cause is clear, we make the fix – swapping the OEM cartridge, replacing the flapper and fill valve, servicing the shower valve, or installing a new Kohler fixture if replacement is the better path. We keep the work warranty-safe and use parts that fit correctly.
- 3
Test. We run the fixture under normal use – hot and cold, full flow and shutoff – and check for leaks, drips, and temperature stability. Nothing gets signed off until it behaves correctly.
- 4
Warranty and records. We leave you clear documentation of what was repaired and what parts were used, which matters for any Kohler warranty question and for your own records. Then we tell you what to watch for down the road.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Cutler Bay
We work across the Kohler bathroom and kitchen lines most Cutler Bay homes actually have. That includes faucets from the Artifacts collection, toilets from the Devonshire series, the Archer bathtub and shower receptor, and the Kathryn undercounter and pedestal sinks. We handle faucet cartridge and valve work, toilet fill and flush repairs, tub and sink servicing, and full fixture replacement when repair no longer makes sense. We also install new Kohler fixtures during bathroom remodels – vanities, walk-in showers, tub-to-shower conversions – so the fixture and the room come together the right way. If your Kohler piece isn’t on this list, call and describe it; the odds are we’ve worked on the same type.
We Also Service These Brands
Kohler is one piece of a bigger picture. The same company that services your Kohler bathroom also installs KraftMaid cabinetry in your kitchen, GAF roofing overhead, PGT impact windows and doors, and Master Halco fencing at the perimeter. One contractor, every phase – which is what lets a Kohler bathroom remodel tie cleanly into a broader project instead of waiting on handoffs between trades. If your project crosses brands, you’re covered under one point of accountability.
FAQs – Kohler Construction Service in Cutler Bay

No. We are an independent Kohler service provider, not affiliated with or authorized by Kohler. That independence is deliberate – it lets us source genuine OEM or quality aftermarket parts and recommend repair or replacement based on the condition of your fixture, not on brand direction. Call (833) 630-5172 for a free estimate.
Yes. We use genuine Kohler OEM parts for critical components like cartridges, flush valves, and thermostatic valves, and high-quality aftermarket parts for less critical items such as supply lines and seals. We won’t claim to stock OEM parts we don’t carry, and we won’t swap in a part that fits poorly. Call (833) 630-5172 to discuss your specific fixture.
Most single-fixture Kohler repairs – a cartridge, a fill valve, a flapper – are handled in one visit. Larger work like a shower valve service or a fixture replacement may take longer depending on what’s behind the wall. We’ll give you a realistic timeline with your written estimate, and the price is set per job so there are no change orders. Call (833) 630-5172 to get scheduled.
We cover Kohler faucets, toilets, bathtubs, shower receptors, and sinks, including the Artifacts, Devonshire, Archer, and Kathryn lines. That spans cartridge and valve repairs, fill and flush fixes, tub and sink servicing, and full fixture installation during a remodel. Call (833) 630-5172 if you’re unsure whether your fixture is in scope.
Proper service should respect the original Kohler warranty on your fixture, and we work in a warranty-safe way. We keep clear records of repairs and parts, and if a problem sits inside factory coverage we’ll flag it so you can pursue it. Independence from Kohler doesn’t mean careless with your coverage. Call (833) 630-5172 with questions.
It depends on the fixture and the scope. There’s no number for a single repair without seeing it, but here are typical estimated ranges for the projects that most often involve Kohler fixtures. These are estimates, and the written estimate sets the final price.
| Project | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Shower Replacement | $3,000 – $8,500 |
Call (833) 630-5172 for an exact quote – estimates are free. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Book Your Kohler Service in Cutler Bay, FL
Whether it’s a dripping Artifacts faucet, a running Devonshire toilet, or a full Kohler bathroom remodel built around an Archer tub or Kathryn sink, we’re ready to take a look. Estimates are free, quotes are written line by line, and the price is fixed with no change orders. Call (833) 630-5172. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Cutler Bay.












