







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Cutler Bay Homeowners Choose PGT Construction
We provide independent PGT construction service in Cutler Bay – installing, repairing and coordinating work on PGT impact windows and doors with technicians who know these products as storm-rated assemblies, not as generic glazing. PGT is a Florida-born manufacturer, so its windows and doors are engineered for wind-borne debris and high design pressure ratings, and we treat them that way on every project. We are an independent service provider and independent coordinator of local PGT pros, not an authorized dealer, and we make no claim of manufacturer partnership or warranty endorsement. Our technicians have up to 15 years of experience in Miami-Dade’s High Velocity Hurricane Zone.
Call (833) 630-5172 for a free estimate.
Why Trust Construction Cutler Bay for Your PGT Construction?

PGT impact products are built around laminated glass, heavy panels, and precise hardware alignment. When those three things are in balance, a slider glides and seals. When one drifts, you get drag, whistling and water at the meeting rail. Our technicians have up to 15 years of experience reading those symptoms and tracing them to the actual cause instead of selling a whole unit the moment a door gets stiff.
We use PGT OEM or OEM-spec latches, rollers, weatherstripping and glazing seals wherever those parts exist, because generic hardware on a heavy impact panel throws off alignment and breaks the seal line. We don’t claim to stock genuine PGT parts or to be a dealer; we source what fits and we tell you honestly when an OEM part is no longer available and a quality aftermarket match is the practical path.
Warranty-safe practice matters just as much. We document what we touched, keep the perimeter sealing correct, and avoid practices that would give a manufacturer grounds to walk away from a claim. Our work is backed by a workmanship warranty, and we hand you a written, line-item estimate before anything starts. That discipline is why homeowners in Cutler Bay keep coming back for window, door and roof scopes on the same house.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Cutler Bay
Impact products fail in specific places. Here’s what we see most often across PGT installations in Cutler Bay, and why each one happens.
- Hardened weatherstripping and wool-pile seals on WinGuard sliders. South Florida sun bakes the seal material until it flattens and stiffens. Once that happens, the meeting rail stops sealing, rain drives in during a downpour, and wind whistles through a door that’s fully latched. Replacing the seals restores the barrier; it’s one of the most common repairs we handle.
- Worn rollers, tandem wheel assemblies and corroded tracks on impact sliding doors. Salt-laden air from Biscayne Bay goes after metal hardware. Rollers wear, tandem wheels seize, tracks pit, and heavy panels start to drag or refuse to seat. The glass is usually fine. The running gear underneath is the problem.
- Sealant and glazing deterioration at the perimeter. The frame-to-wall junction and the glazing bead take years of thermal cycling and UV. When the sealant shrinks, water finds its way behind the frame and shows up as a leak that looks like a glass failure but isn’t. Re-sealing the perimeter correctly, with the right materials, stops it.
- Hairline cracks and seal failure in laminated impact glass. Years of heating and cooling can open a fine crack or cloudy delamination at the edge of a laminated pane. This is the one failure where a patch isn’t the honest answer, because the impact rating depends on the glass being intact.
- Screens and frames bent by storm debris. A storm doesn’t have to break glass to damage a unit. Debris dents frames and buckles screens, which throws off the panel fit and lets water past a seal that was fine before the storm.
PGT Parts & Our Repair-vs-Replace Approach

Every PGT call starts with a diagnosis, not a quote for a whole unit. We pull the panel, inspect the rollers and tandem wheels, check the weatherstripping and wool pile, look at the glazing seal and the perimeter sealant, and test the panel in the track. Most of the time we find worn hardware or a tired seal, and that’s a repair with quality parts that fit the unit correctly.
We lean on PGT OEM or OEM-spec components where they exist, because a generic latch or roller on a heavy impact panel creates alignment problems and sealing failures down the road. Where an OEM part is discontinued, we’ll present a quality aftermarket match and explain the trade-off so you decide with full information. Replacement becomes the right call when the laminated glass or the frame is compromised and the unit’s impact rating can no longer be trusted. At that point we say so plainly, because an impact window that doesn’t perform is worse than no window at all.
Call (833) 630-5172 for a free estimate and a straight answer on repair versus replace.
Our PGT Service Process – Step by Step
A typical PGT job with us runs through four stages, and each one has real detail behind it.
- 1
Diagnosis. We operate the panel, inspect hardware, seals, glazing and perimeter, and identify whether the problem is drag, water intrusion, air infiltration or glass. On the roof side of a combined scope, we check tie-ins and flashing before recommending anything.
- 2
Repair or install. For repairs we replace OEM or OEM-spec rollers, latches, weatherstripping and seals, then re-seal the frame-to-wall junction. For installation we set the unit, verify shimming and anchor placement, and flash and seal the perimeter to meet High Velocity Hurricane Zone requirements in Cutler Bay.
- 3
Test. We cycle every door and window, check latch engagement, confirm the panel seats flush, and water-test where the scope calls for it. A slider that doesn’t seal gets adjusted before we leave.
- 4
Warranty and documentation. We hand over what was replaced, what was sealed and what to watch, so your records stay clean if a manufacturer warranty question ever comes up.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Cutler Bay

We service the PGT product family homeowners actually have on their houses here: WinGuard Aluminum and WinGuard Vinyl impact windows, PremierVue and 7000-series aluminum impact windows, and impact sliding glass doors. That covers the hardware, glass and sealing details on each type, from a single sticking slider to a full replacement of aging units with impact-rated assemblies.
Cutler Bay’s housing stock runs heavily to 1960s through 1980s ranch homes and modest 1990s subdivisions, many still carrying original single-pane windows. When you replace those with impact units, the work is as much about the opening as the product. Frames get squared, anchors land in sound material, and the perimeter gets detailed for moisture management so humid wall cavities behind the frame don’t turn into a mold problem later. Miami-Dade’s High Velocity Hurricane Zone product approval applies to every unit we install.
We Also Service These Brands
PGT is one specialty here, not the whole business. We also work with KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems and Master Halco fencing, among more than 50 manufacturer lines across our service categories. That breadth matters when a project touches the windows and the roof at the same time, or when a kitchen remodel needs its opening re-worked before new units go in. One contractor can carry the whole scope.
FAQs – PGT Construction Service in Cutler Bay
No. We are an independent service provider and independent coordinator of local PGT pros, and we are not an authorized PGT dealer. We don’t claim a manufacturer partnership or warranty endorsement. What we do claim is genuine product knowledge and quality work on PGT equipment.
Yes. We use PGT OEM or OEM-spec latches, rollers, weatherstripping and glazing seals wherever those parts exist, because generic hardware on heavy impact panels causes alignment and sealing problems. If an OEM part is discontinued, we’ll explain the aftermarket match before using it. Call (833) 630-5172 to schedule a free estimate.
Hardware and seal repairs on a single slider are typically a same-day job. A full window or door replacement takes longer and depends on the number of openings, product lead times and permitting. Your written estimate lays out the expected timeline before work begins. Call (833) 630-5172 for a free estimate.
We service and install PGT impact windows and impact sliding glass doors, including WinGuard Aluminum and WinGuard Vinyl windows, and PremierVue and 7000-series aluminum impact windows. That includes hardware, glazing and perimeter sealing work on each. Call (833) 630-5172 to discuss what you have.
Not when the work is done correctly. We use OEM or OEM-spec parts where they exist, keep the perimeter sealing right, and document what we touched so your records hold up if a warranty question comes up. We can’t speak for PGT’s determinations, but we don’t give a manufacturer a reason to decline a claim.
Typical estimated ranges for the work we do around PGT windows and doors in Cutler Bay are below. These are estimates only; the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Call (833) 630-5172 for an exact quote – estimates are free.
Usually it can be repaired. A dragging panel most often traces to worn tandem rollers and flattened weatherstripping rather than the glass itself, and replacing OEM-spec hardware plus adjusting the tracks restores it. Replacement only becomes the honest call when the laminated glass or frame is compromised.
Because the leak is almost never the glass. Hardened weatherstripping at the meeting rail, deteriorated glazing sealant, or a failed frame-to-wall seal lets water past a latched window. Diagnosing which one it is comes before any repair. Call (833) 630-5172 for a free estimate.
Yes, it can be. The impact rating depends on the laminated glass being an approved assembly for that unit. Substituting non-PGT glass can leave you with a window that no longer meets the rating, and in Miami-Dade’s High Velocity Hurricane Zone that matters for code and for insurance. We’ll tell you plainly when a full unit replacement is the honest path.
Yes. Salt-laden air from Biscayne Bay goes after rollers, tandem wheels, latches and tracks faster than inland conditions do. Rinsing hardware, keeping tracks clear of grit and grit-checking seals each season extends the life of the unit considerably. When hardware does corrode, replace it with OEM-spec parts rather than generic ones.
Yes, and it often makes sense. Window replacement and roof work intersect at flashing and tie-ins, and coordinating both through one contractor reduces delays caused by handoffs. Roof repair typically runs $400 – $1,800 and replacement $8,000 – $20,000 in typical estimated ranges. Call (833) 630-5172 for a free estimate on a combined scope.
Book Your PGT Service in Cutler Bay, FL
Whether you have a sticking impact slider, a leak at the meeting rail, or a full window and door replacement ahead, we’ll diagnose it properly and give you a written, line-item estimate. One contractor, every phase. Call (833) 630-5172. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Cutler Bay.












