







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Cutler Bay Homeowners Choose Toto Construction
We provide independent Toto construction service in Cutler Bay, FL. That means diagnosis and repair of Toto toilets and Washlet systems, plus full bathroom remodeling around them, using quality parts that fit the equipment rather than a one-size-fits-all approach. Our technicians have up to 15 years of experience, and we’re not affiliated with or authorized by Toto. We’re an independent provider, and we say so plainly.
What sets our Toto work apart is that we know the products by model family and part number, not by a call-center script. A Drake that ghost-flushes and an Aquia IV with a stalled Washlet wand are two different problems with two different fixes. Cutting through that confusion is what we do. Call (833) 630-5172 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Cutler Bay for Your Toto Construction?

Toto equipment rewards technicians who pay attention to the details. The flush geometry on a Drake or Ultramax II depends on exact-spec parts, and the washlet electronics need calibration when a filter or control board changes. Our technicians have spent time on both sides of that line, and they treat a Toto repair as a precision job, not a swap.
We source OEM Toto fill valves, flappers, and Washlet filters first because the system’s performance depends on them. For non-critical connections, quality aftermarket seals and wax rings are fine. That’s a judgment call we make case by case, not a shortcut.
Warranty-safe practice matters. We don’t modify a Toto fixture beyond what the manufacturer’s design allows, and we document what we replace so you have a clear record if a warranty question ever comes up. Cutler Bay homes built before the current building code often have plumbing that needs checking alongside the fixture itself, and we account for that. The same company that services your Toto toilet can remodel the bathroom around it, replace impact windows, or re-roof the house. One contractor, every phase.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Cutler Bay
- Ghost-flushing on Drake and Ultramax II. A warped or grit-fouled 3-inch flapper lets tank water seep past the seal, so the fill valve re-trips every 15 to 30 minutes. Owners often mistake it for a running toilet and replace the fill valve when the flapper is the real culprit. Hard-water scale on the seal makes it worse.
- Washlet seat failure. The bidet wand stalls mid-cycle, or the seat heater throws an error code when the internal water filter clogs. Cutler Bay’s hard, mineral-heavy supply accelerates that clogging. The unit usually needs filter service or a control-board swap, not a new seat.
- Skirted-base fastener rot on Aquia and Ultramax II. The concealed side bolts and plastic mounting brackets crack or corrode, letting the bowl shift and the seal weep at the flange. You may notice rocking before you notice a leak.
- Fill-valve and supply-line degradation. Toto’s OEM fill valves hold up well, but the braided supply hoses and plastic shank washers harden and split with age. That produces slow tank refills or pinhole leaks at the wall stop.
- Mineral ring and scale at the tank waterline. A common sign that the fill valve isn’t shutting off cleanly and the flapper seal is compromised. On a Toto, that ring is your early warning before the ghost-flush starts.
A typical job looks like this: a homeowner notices the toilet refilling on its own every few minutes and a faint mineral ring at the tank waterline. The usual cause on a Toto Drake or Ultramax II is a stiffened 3-inch flapper or a fill valve that no longer shuts off cleanly, often compounded by hard-water scale on the seal. A qualified local pro shuts off the supply, drains the tank, swaps the OEM flapper and fill valve, checks the refill tube height and flush volume, and confirms the ghost-flush is gone before reinstalling the lid.
Toto Parts & Our Repair-vs-Replace Approach

Parts choice drives how a Toto performs. We source OEM Toto fill valves, flappers, and Washlet filters first because the flush geometry and electronic calibration depend on exact-spec parts. For non-critical connections, quality aftermarket seals and wax rings are fine. We don’t claim to stock every part, and we don’t pretend to be a Toto dealer. We repair, install, and service Toto equipment with quality parts that fit it.
Repair versus replace comes down to the cost of the fix against the value of the fixture. On a 15-year-old Drake, a $30 OEM flapper beats a $900 replacement all day. A Washlet with a fried control board and a failed heater is usually replace-the-unit territory. Neither call is made to sell you something. It’s made to leave you with a fixture that works for years. Call (833) 630-5172 for a free estimate on your Toto repair.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the model family and the exact symptom: ghost-flush, wand stall, rocking base, or slow refill. That tells us which part is actually failing before we touch the tank.
- 2
Repair or install. We shut off the supply, drain the fixture, and swap the OEM flapper, fill valve, or Washlet filter. For a bathroom remodel, we set the Toto fixture and coordinate the flooring, vanity, and shower work around it.
- 3
Test. We check refill tube height, flush volume, seat heating, and wand travel. A ghost-flush gets confirmed gone before we call the job done.
- 4
Warranty and record. We document what we replaced and leave you a clear record. That protects your warranty and gives the next technician something to work from.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Cutler Bay
We service and install the Toto products Cutler Bay owners live with every day: two-piece and one-piece gravity toilets, dual-flush models, and Washlet-integrated seats. That includes the Drake and Ultramax II families, the Aquia IV with its integrated Washlet, and the EcoPower and Prominence gravity lines. We work on the flush systems, the washlet electronics, the mounting hardware, and the supply connections. We also remodel the bathrooms these fixtures live in, so a toilet replacement and a shower conversion can move as one project. Our technicians have up to 15 years of experience across the brand’s product range.
We Also Service These Brands
Toto isn’t the only brand in the homes we work in. We handle KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing, and PGT windows and doors, among 50+ manufacturer brands across our seven services. That matters when a bathroom remodel needs a vanity, a countertop, and a new window in the same scope. You get one contractor coordinating the brands, not four specialists stepping on each other’s schedule.
FAQs – Toto Construction Service in Cutler Bay

Is Construction Cutler Bay authorized by Toto? No. We’re an independent Toto service provider and we’re not affiliated with or authorized by the manufacturer. We repair, install, and service Toto equipment using quality parts that fit it, and we say so plainly.
Do you use quality parts that fit Toto equipment? Yes. We source OEM Toto fill valves, flappers, and Washlet filters first, and quality aftermarket seals and wax rings for non-critical connections. Call (833) 630-5172 for a free estimate.
How long does Toto service take? A ghost-flush flapper or fill-valve repair is usually a short visit. A Washlet control-board or filter service, or a bathroom remodel with a new Toto fixture, runs longer. The written estimate sets the scope and the timeline. Call (833) 630-5172 to schedule.
What kinds of Toto products do you cover? Two-piece and one-piece gravity toilets, dual-flush models, Washlet-integrated seats, and the mounting and supply connections. We service the Drake, Ultramax II, Aquia IV, EcoPower, and Prominence families.
Will service void my Toto warranty? Service from an independent provider doesn’t automatically void a manufacturer warranty, but it pays to keep records of the parts used. We document what we replace so you have that record. Call (833) 630-5172 if you have a warranty question.
How much does Toto construction cost in Cutler Bay? Service and installation is priced per job by a written estimate. Remodel work around a Toto fixture is typically estimated at these ranges:
| Service | Typical Estimated Range |
|---|---|
| Full Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
These are typical estimates, and the written estimate sets the final price. Call (833) 630-5172 for an exact quote. Estimates are free.
My Toto Drake keeps refilling every few minutes – is that a flapper or the fill valve? It’s usually the 3-inch flapper first: a warped or scale-fouled flapper lets tank water seep past the seal, and the fill valve re-trips. A fill valve that no longer shuts off cleanly makes it worse. Call (833) 630-5172 and we’ll diagnose it with the right parts.
Do you need Toto authorization to work on my Washlet? No. A qualified independent technician can service a Washlet without factory authorization. What matters is knowing the model and using parts that fit the calibration. Call (833) 630-5172 to book service.
My Toto one-piece toilet rocks on the floor even though the bolts are tight – what causes that? On Aquia and Ultramax II skirted bases, the concealed side bolts and plastic mounting brackets crack or corrode, so the bowl shifts even with tight bolts. The seal can weep at the flange. Call (833) 630-5172 for a free estimate.
Is a Toto Washlet worth repairing when the control board fails? Sometimes. A filter service or a single board swap is worth it. A Washlet with a fried control board and a failed heater is usually replace-the-unit territory. We’ll tell you which side of that line you’re on. Call (833) 630-5172.
Can you remodel my bathroom while keeping my existing Toto toilet? Yes. We protect and reuse an existing Toto fixture when it’s sound, and set a new one when the remodel calls for it. The toilet, shower, vanity, and flooring move as one project. Call (833) 630-5172 to schedule your free estimate.
Book Your Toto Service in Cutler Bay, FL
Whether you’re chasing a ghost-flush on a Drake or planning a full bathroom remodel around a Toto fixture, we handle it as one project. Licensed and insured, with free estimates and written line-item quotes. Call (833) 630-5172. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Cutler Bay.












