







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Cutler Bay?
Cabinet installation in Cutler Bay typically costs $4,000 to $13,000 for a full kitchen’s worth of cabinets, with the final figure driven by cabinet line, box count, and how much of the old kitchen has to come out first. A straight swap of like-for-like boxes sits at the low end; semi-custom KraftMaid or Wellborn cabinetry with new fillers, panels, and crown lands at the high end. Every number on this page is a typical estimate for the Cutler Bay market in 2026, and the written estimate sets the final price.
Key Takeaways
- Typical cabinet installation in Cutler Bay: $4,000 – $13,000, labor and standard materials together.
- The cabinet line you choose moves the price more than the size of the kitchen does.
- Cabinet installation is one line of a larger kitchen budget, which runs $14,000 – $45,000 for a full remodel in Cutler Bay.
- Free estimates, upfront pricing, and technicians with up to 15 years of experience.
- Call (833) 630-5172. We answer 24/7.

Cabinet Installation Cost Breakdown (2026)
Here’s where the money goes on a typical Cutler Bay cabinet job. Ranges are estimates for the work described, not fixed quotes.
| Line item | Typical estimated range |
|---|---|
| Cabinet installation (labor only, existing layout kept) | $4,000 – $13,000 |
| Cabinet installation including removal and disposal of old cabinets | $5,200 – $13,000 |
| New countertop to sit on the new boxes | $2,000 – $6,500 |
| Backsplash after the cabinets go in | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel, cabinets included | $14,000 – $45,000 |
| Small kitchen remodel, cabinets included | $9,000 – $20,000 |
The single biggest lever is the cabinet line itself. A stock box and a semi-custom KraftMaid or Wellborn box can cost similar amounts to install, but the material cost behind them is very different, and that gap shows up in the total. Box count comes next: a galley kitchen and an L-shaped kitchen with an island are two different jobs even when the square footage looks close. Add-ons push the number up in small steps that add fast – crown molding, light rail, glass inserts, pull-out trays, soft-close hinges upgraded across every door, and panel-ready ends where a cabinet meets an appliance. Pulling the price down are the boring wins: keeping the plumbing where it is, keeping the range where it is, and choosing a cabinet depth that fits the room without custom fillers.
If the cabinets are part of a bigger plan, the whole scope usually gets priced together. Take a look at our kitchen remodeling page to see how cabinet work sits inside a full remodel.
What Affects Cabinet Installation Pricing in Cutler Bay
- Cabinet line and door style. Stock, semi-custom, and custom boxes live at different price points, and a raised-panel door costs more than a slab. KraftMaid and Wellborn both give you semi-custom sizing without a full custom price, which is where most Cutler Bay homeowners land.
- Layout changes. Moving a sink, a range, or a refrigerator changes the plumbing and the electrical, and that’s where a cabinet install turns into a kitchen remodel. Keeping the appliances in place keeps the cabinet price in the lower half of the range.
- Wall and floor condition. South Florida homes often have walls that aren’t perfectly plumb after years of humidity swings, and cabinets have to be shimmed and scribed to sit level. Out-of-square corners mean filler strips and extra time.
- Ceiling height and soffits. Cutler Bay homes vary between flat ceilings and dropped soffits above the cabinets. A soffit limits how tall the uppers can be and can mean cutting it back first, and that’s labor before a single box goes on the wall.
- Countertop and backsplash coordination. Cabinets get set, then templated for stone. Cambria, Silestone, and Caesarstone all require a template after the boxes are in and level, which is why the countertop line is priced separately and scheduled after installation.
- Access and haul-away. A second-floor kitchen, a tight driveway, or a hallway that forces boxes to come in through a window all add labor. Old cabinets have to be removed and hauled off, and that disposal is part of the job.
One local note that surprises people: Cutler Bay’s summer humidity is hard on particleboard and MDF boxes, especially in a kitchen that gets heavy use. Plywood construction and a proper moisture-resistant finish cost more up front and hold up better here. If you’re weighing lines, ask what the box is made of before you ask what the door looks like.

How to Save on Cabinet Installation
There’s no trick to cutting the cabinet bill in half, but these moves reliably pull the number down:
- Keep the plumbing and appliance locations. Not moving the sink or range is the difference between a cabinet install and a partial kitchen remodel.
- Choose semi-custom over full custom. KraftMaid and Wellborn give you sizing flexibility without the custom price tag, and installation labor is close to the same.
- Skip the island if the room doesn’t need one. An island runs $3,000 – $10,000, and it’s the easiest line to remove if the budget is tight.
- Do the backsplash later if you need to. Cabinets first, countertops second, backsplash third is a normal sequence and lets you spread the spend across phases.
- Get one written estimate covering the whole scope. When cabinets, countertops, and the backsplash are priced by one contractor, you’re not paying twice for mobilization or coordination.
Free estimates are part of how we work, and upfront pricing means you see the line items before anything is ordered. Call (833) 630-5172. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can You Install Cabinets and a Countertop in One Project?
Yes. Cabinets and countertops are one project in practice, because the stone can’t be templated until the boxes are set and level. Sequencing them under one contractor removes the handoff where most delays happen. Cabinets go in, the template is taken, the slab is fabricated, and the countertop lands after. Backsplash follows the countertop. When one company carries all three phases, the schedule holds.
If the project also touches the bathroom, the same logic applies. See our bathroom remodeling page for how vanity cabinets and countertops get sequenced there.
Is Cabinet Installation Cheaper Than Refacing?
Refacing is usually cheaper than full replacement, but it only works when the existing boxes are solid, square, and the layout is right. New cabinet installation in Cutler Bay starts at $4,000, and refacing typically runs below that for a comparable kitchen, but you keep the old boxes and the old interior. If the boxes are soft, water-damaged, or the layout doesn’t work, refacing is money spent on a frame that won’t last. In a humid climate, a 15-year-old particleboard box that’s seen a few summers usually isn’t worth refacing.
What Does a Small Kitchen Cabinet Install Cost in Cutler Bay?
A small kitchen cabinet install typically falls in the lower half of the $4,000 – $13,000 range, often $4,000 – $7,500, because there are fewer boxes and less wall to fit. That figure is for the cabinets. If the small kitchen gets a full remodel, the combined number lands in the $9,000 – $20,000 small kitchen remodel range. The box count on a small galley or a one-wall kitchen keeps labor down, but tight spaces can add time if the room is hard to work in.
Do I Need a Permit to Install Cabinets in Cutler Bay?
Cabinet replacement in the same location usually doesn’t require a permit, but moving plumbing, adding electrical circuits, or changing the layout can. Most cities require a permit when the work goes beyond like-for-like replacement, so check with the Town of Cutler Bay’s building department before the boxes are ordered. If the plan includes moving a sink or adding an outlet for a microwave drawer, plan the permit into the schedule, not after.
How Long Does Cabinet Installation Take?
A typical Cutler Bay cabinet install takes two to five days for the boxes, with countertops adding another week or two for template and fabrication. Small, straight installs with stock cabinets can finish in two days. Larger kitchens with an island, crown, and panel-ready ends run longer. Add-ons like a countertop and backsplash stretch the whole sequence to a few weeks, mostly because of stone fabrication, not installation.
Cabinet Installation FAQs
How much does cabinet installation cost in Cutler Bay?
Cabinet installation in Cutler Bay typically costs $4,000 – $13,000, with the final number depending on the cabinet line, box count, and whether the old cabinets come out. Call (833) 630-5172 for an exact quote – estimates are free.
Can you install cabinets and leave the countertop in place?
Rarely. Countertops are usually templated after new cabinets are set, so a new install typically means a new countertop, which adds $2,000 – $6,500. If the existing counter can be saved, that’s a case-by-case call during the estimate. Call (833) 630-5172 to have it looked at.
Is it cheaper to install cabinets myself?
No, in most cases. Cabinet installation looks simple and isn’t: boxes have to be level, plumb, and square, or the doors won’t align and the countertop template will be off. A re-do costs more than the labor you saved. Call (833) 630-5172 for a free estimate.
What cabinet brands do you install in Cutler Bay?
We install semi-custom and custom lines including KraftMaid and Wellborn, paired with countertops from Cambria, Silestone, and Caesarstone. We’re an authorized installer across more than 50 name-brand product lines, so the material spec matches the budget and the room. Call (833) 630-5172 to talk through lines.
How much is a full kitchen remodel with cabinets in Cutler Bay?
A full kitchen remodel in Cutler Bay typically runs $14,000 – $45,000, with cabinets at $4,000 – $13,000 of that total. A small kitchen remodel lands at $9,000 – $20,000. Call (833) 630-5172 for an exact quote – estimates are free.
Why One Contractor for the Whole Cabinet-to-Countertop Scope
Cabinet installation touches plumbing, electrical, countertops, and backsplash, and handing those off between contractors is where projects slip. One contractor, every phase is how we work: the same company that sets the boxes templates the stone, sets the backsplash, and handles the trades involved in the kitchen. Our technicians have up to 15 years of experience, we’re licensed and insured, and we carry the project, not just the trade.
If the exterior is part of the plan, the same scope applies from the driveway to the ridge line. That includes construction in Cutler Bay and fence installation, so a full-home upgrade stays with one accountable contractor. Cabinet work inside, pavers outside, and the schedule doesn’t fall apart at the handoff.
What Happens When You Call
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. During dispatch hours, fast dispatch from 7am to 7pm means a same-day estimate visit is often possible. The estimate is free, the pricing is upfront, and if you decide to move forward, the written estimate sets the final price. Same-day service is available when the schedule allows.
Get a Free Cabinet Installation Estimate in Cutler Bay
Bring your cabinet line, your measurements, or just photos of the kitchen. We’ll price the boxes, the countertop, and the backsplash as one project so nothing gets missed. Call (833) 630-5172 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Cutler Bay market as of 2026. Construction Cutler Bay offers free estimates – call (833) 630-5172.
Written by the team at Construction Cutler Bay.
What Our Customers Say
"He caught an error in the engineer's drawings before it got framed, which would have been an expensive thing to discover later."
- Kurt Quinn"Every inspection passed first time. The building department clearly knows him and that made the whole process easier."
- Heather Fletcher"Quality construction and a professional operation. Communication was strongest at the site meetings, and slower by email in between."
- Paul Thompson












